MW-Messtechnik
Hot Measurement System
KEY FEATURES
Measures All Important Quantities…
…and More
BASIC FEATURES
Primarily measured quantities:
SOFTWARE FEATURES
Microsoft Windows® environment
Display formats:
Measures All Important Quantities…
…and More
- Full-Power On-Line Measurement
- High Accuracy, High Dynamic Range
- Compact Design
- Intelligence Inside
- RS-232 Interface to External Controller
- Windows Control, Visualisation and Data Logging Software
- Drives Autotuning System
BASIC FEATURES
Primarily measured quantities:
- Reflection coefficient (magnitude and phase)
- Incident power
- Frequency
- Internal temperature for accuracy enhancement
- Measurement under full-power operating conditions
- 20 dB dynamic range of working power
- WR340 waveguide interface (R-26, WG-9A) for 2.45 GHz ISM band
- WR975 waveguide interface (R-9) for 900MHz ISM band
- Contains single-board computer for fast data acquisition and processing
- Integrates easily into existing computer-based instrumentation and monitoring
- In conjunction with the TriStun tuner enables automatic impedance matching of timevarying
SOFTWARE FEATURES
Microsoft Windows® environment
Display formats:
- Magnitude and phase of reflection coefficient
- Return loss, VSWR
- Incident, reflected and absorbed powers (in watts or dB)
- Polar diagram, Smith chart, Rieke diagram
- Simultaneous display in various formats as well as numerically
- Unlimited data logging of all quantities of interest
- Extensive on-line help
1) Actual maximum operating power is fixed according to customer’s demand not to exceed 30 kW. Actual minimum operating power is then 20 dB less or 1 W, whichever is greater.
Das Hot Measurement System ist auch für 896, 915, 922MHz / R9-Hohlleiter lieferbar.
_________________________________________________________________________________________________
_________________________________________________________________________________________________
Automatic Impedance Matching System
KEY FEATURES
BASIC FEATURES
- Computerized Stub Tuner,
- Integrates HOMER Impedance Analyzer and Three-Stub Tuner
- Accurate and Fast Automatic Matching of Varying Loads
- Autonomous or PC-Controlled Operation
- Full Operating Power Monitoring of Reflection, Frequency and
- Power Compact Design
- RS-232 and CAN Bus Interface to External Controller
- Windows Control, Visualisation and Data Logging Software
BASIC FEATURES
- Automatic impedance matching under full-power operating conditions
- Optimized tuning algorithm based on vector reflection
- coefficient measurement
- Measurement features identical with HOMER’s
- Time to achieve match 1 to 6 seconds (depending on the load mismatch)
- WR340 waveguide interface (R-26, WG-9A) for 2.45 GHz ISM band
- Contains single-board computer for fast data acquisition and processing
- Integrates easily into existing computer-based instrumentation and monitoring systems
1) Actual maximum operating power is fixed according to customer’s demand not to exceed 30 kW. Actual minimum operating power is then 20 dB less or 1 W, whichever is greater.
2) Generally, the match is improved for loads outside of the tuning range (e.g. VSWR=30 drops below 5).
2) Generally, the match is improved for loads outside of the tuning range (e.g. VSWR=30 drops below 5).
